Printronix P5000LJ Ext Execute Copy, UPC Descenders, Compressed CPI, Ignore Char

IGP/PGL Emulation
105
Ext Execute Copy
•Disable. Dynamic data, overlay data, etc. are not allowed if the opti onal
Form Count parameter (number of forms to print) is specified as part of
the Execute command. (This setting is IGP-100 compatible.)
•Enable. Dynamic data, overlay data, etc. are allowed within a fo rm in
which the Form Count parameter is specified in the Execute command. In
this case, the exact same form (with identical dynamic data) is printed for
whatever the Form Count is. However, incremental data is not
incremented since the page that is printing is exactly the same, th e
overlay data is only printed with the first form and not on sub sequent
forms, and each form is printed on a separate page.
UPC Descenders
This parameter allows you to print bar code descenders when human
readable data is not presented in the UPC/EAN bar codes.
•Enable. UPC/EAN bar codes are printed with descenders, even if there is
no human readable data.
•Disable. UPC/EAN bar codes are printed without descenders if there i s
no human readable data.
Compressed CPI
This parameter allows you to choose a compressed character (60% shor ter)
for 17 or 20 CPI instead of the normal height character.
•Disable. The PGL does not use compressed 17 or 20 CPI font.
•Enable. Uses the standard compressed 17 or 20 CPI font.
Ignore Char
Ignore Mode
This parameter instructs the PGL to ignore the character selec ted under the
Select Character menu.
•Disable. The PGL does not ignore any characters.
•Enable. The PGL ignores the characters specified in the Sel ect Chara cter
menu.
Select Character
Instructs the PGL which decimal character (0-255) to ignore from the host.