Printronix P5000LJ Store pserver from default, Store pserver from current, Store Commands

Store Commands

store pserver tcpsocket TCPportnumber dest destination

store pserver tcpsocket 5000 dest d1prn

Assign a pre-defined TCPportnumber to a particular destination on the NIC. Therefore, if you are using a print method that sends jobs directly to a TCP port number, you still have the option to process the job data through this destination setting.

store pserver novell passwd password

store pserver novell passwd mplex

Store the password for the NIC to use when logging in to a Novell file server. This password would have to match one set on the file server.

store pserver novell user name username

store pserver novell user name micro1

Define a username on the NIC to be used when it logs in to a Novell file server to find information. This username must match a user pre-defined on the Novell file server.

store pserver novell user passwd password store pserver novell user passwd mplex2

Define a password on the NIC for the Novell user already defined. This password must match the one stored on the Novell file server. Passwords are optional as long as there is not one defined on the file server for the user.

store pserver novell fserver adddel fileservername

store pserver novell fserver add fs1

Add or remove a server entry on the NIC for the Novell file server it will be servicing.

store pserver smb workgrp newworkgroupname

store pserver smb workgrp eng

Define a different Windows workgroup as defined by newworkgroupname for the NIC to be visible within. By default, the print server only comes up within the group called “WORKGROUP.”

store pserver from default

Set all general print server settings back to factory defaults.

store pserver from current

Store all current general print server settings to flash memory so they are retained after a power cycle. This ensures all current settings match what is stored in flash memory.

store rprinter adddel printservername printernumber destination

store rprinter add pserver1 0 d1prn

Add or delete the RPRINTER settings on the NIC for a Novell environment. The printservername must be the name of an existing PSERVER.NLM on your Novell file server. The printernumber is the printer number within this PSERVER.NLM. The destination is the queue on the NIC where the print jobs will be sent to.

store tcpip ifnum addr IPaddress

store tcpip 1 addr 192.75.11.9

245