Printronix P5000LJ user manual Novell Host Configuration, NetWare Version 3.x Pserver Setup

Chapter 11 Novell Host Configuration

Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.

3.At the Administration Configuration HTML form that displays, highlight the field beside the “Name” heading and type in the new name of the print server.

4.Click on the SUBMIT button when done and physically repower the printer to make the new setting take effect.

Novell Host Configuration

Under all versions of NetWare, both PSERVER and RPRINTER setups are supported by the NIC. Since a PSERVER setup is the most common, you will find the necessary steps to configure the NIC as a PSERVER shown first.

Configuration for RPRINTER and NPRINTER setup follow the PSERVER information.

Note	The NIC can service up to four printers on one file server. It can not service
	multiple file servers at one time.

NetWare Version 3.x PSERVER Setup

To configure a print queue on a NetWare 3.1x network:

1.Log on to the Novell file server as supervisor.

2.Enter PCONSOLE.

3.Select “Print Queue Information” from the PCONSOLE Main Menu.

4.Press INSERT to add a new queue to the list of currently defined queues showing.

5.Type in the name of this new queue when prompted and press ENTER. This can be any name you would like.

6.Press ESCAPE to return to the Main Menu.

7.Select “Print Server Information” and press ENTER.

8.Press INSERT when the list of existing print servers displays.

9.Type the name of the NIC when prompted for a print server name and press ENTER when done. By default, the NIC is named M_xxxxxx where xxxxxx equals the last six digits of the print server Ethernet address found on configuration printouts or reading MAC address on control panel. (e.g., M_071C1A).

10.Back at the print server list, select this newly defined NIC and press

ENTER.

208