Printronix P5000LJ user manual Printer Control Menu, Ethernet Speed

Auto Switching Submenu

Ethernet Speed

This menu option only appears if a 10/100Base-T network interface card (NIC) is installed. The Ethernet Speed menu allows compatibility with different systems and networks. The factory default is Auto Select.

•Auto Select. (the default) This setting tells the 10/100Base-T NIC to perform an auto detection scheme and configure itself to be 10 Half Duplex, 10 Full Duplex, 100 Half Duplex, or 100 Full Duplex.

•10 Half Duplex. Tells the 10/100Base-T NIC to communicate at 10 Megabits per second using half duplex.

•10 Full Duplex. Tells the 10/100Base-T NIC to communicate at 10 Megabits per second using full duplex.

•100 Half Duplex. Tells the 10/100Base-T NIC to communicate at 100 Megabits per second using half duplex.

•100 Full Duplex. Tells the 10/100Base-T NIC to communicate at 100 Megabits per second using full duplex.

Printer Control Menu

The Printer Control Menu allows you to choose the printer's behavior. Options on this menu, as shown below, are described in the following pages.

PRINTER

CONTROL

Unidirectional PMD Fault

Disable* Enable*

EnableDisable

Open Platen

@BOF

Disable*

Enable

Slow Paper

Slew

Disable*

Enable

Power Saver

Time

15 mins.*

(5 sec.-60 min.) Disable Instant

To view options, press:

￿Down

￿Up

￿Next

￿Prev

To select an option, press ENTER.

To return to main menu, press

CLEAR.

To exit menu, press ON LINE. * = Default Setting

127