Printronix P5000LJ Adjusting Polling Time NDS & Bindery, Print Server Setup Manual Telnet Method

Chapter 12 Novell NIC Configuration (10/100Base-T)

Note	The passwords entered in Netware Administrator or PCONSOLE must
	match the password set on the unit.

4.Click the SUBMIT button when done and physically re-power the printer to make the new settings take effect.

Print Server Setup - Manual (Telnet) Method

1.Telnet to the print server. This will bring up a login screen: telnet ipaddress

Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.

2.You should now see a prompt displayed that has the NIC’s IP address followed by a colon then root.

ipaddress:root>

3.At the prompt, enter:

store pserver novell passwd password

Note	The passwords entered in Netware Administrator or PCONSOLE must
	match the password set on the unit.

4.Reset the unit to ensure the changes take effect. reset

Adjusting Polling Time (NDS & Bindery)

You can set the poll time the NIC will use when checking for new jobs under a PSERVER setup. To do this, complete the following steps.

Netware 4.x and 5.x

1.Log in to NetWare Administrator as a user with security equal to “Admin” on your Novell host.

2.Double click on the printer object for which you wish to change the poll time. This will bring up the printer objects details pages.

3.Click on “Configuration” to display the configuration page.

4.Change the “Service Interval” to the desired number (in seconds).

222