Printronix P5000LJ Configuration - Print Model

Current Log Path Settings
147
Current Log Path Settings
Log Path Type
The option is available on the Log Path web page. For a description, see page
148.
Log Path Port
The option is available on the Log Path web page. For a description, see page
149.
Configuration - Print Model
Name
Name of the model. The default model names are m1, m2, m3, m4, m 5, m6,
m7, and m8.
Model Type
Define what processing (if any) will be performed on print jobs p assing
through the associated destination. If set to "raw", the job will not be touched
by the network adapter.
Banner Page
Tell the Ethernet Interface to produce a banner page with each print j ob. The
type of banner page data can be text. You can also specify whether the
banner page should come at the front or the end of a print jo b.
Filter
Specify whether the Ethernet Interface is to add carriage re turns to print jobs
passing through that contain solitary linefeeds. This is common with Unix text
jobs resulting in stair-stepped output.
Header String
Define an escape sequence to be sent to the print er before each print job. For
example, you may want to send a sequence to print the job in landscape
mode or to a certain tray on the printer. You can specify up to four separate
sequences per header string. The Ethernet Interface will exe cute them in
order from top to bottom. If specifying fewer than four sequences, b e sure to
start at the top leaving undefined fields at the bottom.
The most common sequences are listed on the form:
•Print landscape - tells the printer to print in landscape mo de.
•Print portrait - tells the printer to print in portrait mode.