Printronix user manual Using Page Level Recovery On P5000LJ Printers, Method

	Method 2
	Method 2
	Place the printer offline from the control panel. Press and hold either the
	SHIFT+Up arrow or SHIFT+Down arrow to “micro-step” the paper up or down
	as needed. Place the printer back online.
Note	The operation of the View key has been enhanced to include a new
	function. Normally, pressing the View key will move paper six inches up so
	the print can be viewed, and a second depression of the View key will
	move the paper down into the print position. This function is helpful when
	aligning forms.
	The new function of the View key is invoked with a long depression of the
	View key. When the View key is pressed and held, paper will advance
	three complete forms, allowing tearoff at the rear of the printer. After
	advancing paper three forms for tearoff, placing the printer ONLINE will
	move paper downward two forms and printing will resume.

Using Page Level Recovery On P5000LJ Printers

The native mode spooler on MPE/iX 5.5 (and later) supports Page Level Recovery (PLR). PLR provides the ability to restart printing at any page of a document due to device problems or a suspended spooler. (Refer to the HP e3000 MPE/iX Native Mode Spooler Reference Manual for more information.) Clarification on how it is handled for P5000LJ printers is described below.

Note	One feature of the Printer Job Language (PJL) spooler is the ability to
	keep track of pages printed as a part of Page Level Recovery. On a paper
	jam or paper out condition, the printer control panel displays the page
	number counted.
	There are three types of PLR that can occur, and all three use silent run
	techniques. That is, the data is sent to the printer and the printer interprets it
	but does not start actual printing until the printer reaches a target starting
	page specified by the spooler (e.g., the page following the last one printed).

171