Printronix P5000LJ Adding Preferred File Server, Store pserver novell fserver add fservername

Preferred File Server (NDS & Bindery)

Adding Preferred File Server

HTML Method

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP.

2.Direct your Web browser to URL:

http://P5000LJIPaddress/networkConf.html (e.g., http://192.75.11.9/networkConf.html)

Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.

3.Look under the “Novell” section and add the name of the preferred file server in the “File Server” field.

4.Click on the SUBMIT button when done and physically re-power the print server to make the new settings take effect.

Manual (Telnet) Method

1.Telnet to the print server. This will bring up a login screen: telnet ipaddress

Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.

2.You should now see a prompt displayed that has the NIC’s IP address followed by a colon then root.

ipaddress:root>

3.At the prompt, enter:

store pserver novell fserver add fservername

where fservername is the name of the Novell file server you want to add as a preferred file server. This adds the specified file server as a preferred file server on the NIC.

4.Reset the unit to ensure the changes take effect. reset

219