LP Plus Emulation

Printer Protocol

Select the LinePrinter+ protocol you wish to use. Refer to the PCL-II/ LinePrinter Plus Technical Reference Manual for more information.

Print Char. Set

When this selection is displayed and the ENTER key is pressed, the current character set is printed.

CPI/LPI Select

This parameter lets you specify the characters per inch (cpi) value and lines per inch (lpi) value.

Font Attributes

Typefaces

Data Processing. A general purpose font printing out at 120 dpi horizontally and 72 dpi vertically. The width of the font will vary with each cpi.

NLQ. A high quality font printing at 180 dpi horizontally and 96 dpi vertically. This font has serifs, and the width of the font varies with the cpi.

OCR-A /OCR-B. Optical character recognition fonts printing at 120 dpi horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.

High Speed. A draft quality font printing at 120 dpi horizontally and 48 dpi vertically. The width of the font varies with the cpi.

NLQ Sans Serif. A high quality font printing at 180 dpi horizontally and 96 dpi vertically. This font prints without serifs. The width of the font varies with the cpi.

Prop. Spacing

Each printed character is contained inside a character cell. The width of the character cell includes the character and the space around the character.

Disable. Each character cell is printed with the same width. Each column in the printed text will line up.

Enable. The width of each character cell varies with the width of the character. For example, [i] takes less space to print than [m]. Using proportional fonts generally increases the readability of printed documents, giving text a typeset appearance.

87

Page 87
Image 87
Printronix P5000LJ user manual Printer Protocol, Print Char. Set, CPI/LPI Select, Font Attributes, LP Plus Emulation