Parallel Port (PRN)
151
If disabled, the message will contain additional informa tion including the
device name and location, alert description, alert group, and alert severit y
level, and printer status.
Default: Disabled
•Short E-mail Message Length - Specifies the maximum s ize of the short
e-mail message. Acceptable values are 15 to 80 characters.
Default: 80 characters
•Send Test Message - Provides a way to test the validity of the e-mail
address/SMTP server address. If checked, a test message w ill be sent to
the specified e-mail address when the submit button is pressed .
Default: All alert groups are disabled by default.
If the alert message is to be sent to a cellular phone or pager, the Short E-mail
Format option should be enabled. Once this option is en abled, you may
specify the maximum e-mail message length (15-80 char acters). When
enabled, the message will contain the alert description, the sever ity level, and
device name (unless the length of the message exceeds the Sho rt E-mail
Message Length, in which case the message will be trunc ated).
If the Short E-mail format is disabled, the message will contai n additional
information including the device name and location, a lert description, alert
group, alert severity level, and printer status.
To test the validity of the e-mail address and the SMTP se rver address,
enable the Send Test Message option. If the Send Test Mes sage box is
checked, a test message will be sent to the specified e-ma il address when the
submit button is pressed.
Alert Groups
Specifies which alert groups are enabled for reporting fo r this configuration.
When an alert occurs that is contained in one of the enabled alert groups, it
will be posted to the specified SNMP manager, Unix syslog dae mon, and/or
e-mail address. The following table describes whi ch printer events belongs to
which Alert Group.
Default: All alert groups are disabled by default.