Printronix P5000LJ user manual Ethernet Params Menu, IP Address

Auto Switching Submenu

Ethernet Params Menu

ETHERNET

PARAMS

IP Address	Gateway	Subnet Mask	MAC Address	Novell
	Address			Protocol
xxx.xxx.xxx.xxx	xxx.xxx.xxx.xxx	xxx.xxx.xxx.xxx	hhhhhhhhhhhh	Enable*
				Disable

NetBIOS Protocol

Enable*

Disable

Novell Frame	PPM Port
	Number
Ethernet 802.2*	3001*
802.2 Snap	(0-65535)
Auto Sensing
Ethernet II
Ethernet 802.3

PPM Port Timeout

100secs.*

(1-255)

Ethernet1

Speed

Auto Select*

10 Half Duplex

10 Full Duplex

100 Half Duplex

100 Full Duplex

* Factory Default

1If you change the Ethernet speed setting, you must also change the switch or hub setting to match.

The ETHERNET PARAMS menu helps your printer communicate on a network.

For information on assigning the IP Address, Gateway Address, Subnet Mask, and MAC Address, refer to Μετηοδσ Οφ Αδϕυστινγ Παπερ

Ποσιτιον ον παγε 170.

You may also enable or disable the Novell or NetBIOS Protocols within this menu, as well as selecting which Novell Frame scheme is used in processing Novell signals. See Chapter 11, “Novell Configuration” for more details.

If the printer is connected to the Remote Management Software (RMS), the RMS Port number and PPM Port Timeout settings must match the settings in the Remote Management Software program.

IP Address

A numeric address such as 123.45.61.23 which identifies a printer or server in a LAN or WAN.

125