Printronix P5000LJ Select Font, Select LPI, Auto Uppercase, Skip Cmd Prefix, Power on IGP/PGL

104
Chapter 4 Emulation Menu
Select Font
This parameter allows you to select a font for the IGP/PGL feature. The
default is 0, which is U.S. ASCII. The following values are valid c hoices:
0 U.S. ASCII
1German
2 Swedish
3Danish
4 Norwegian
5Finnish
6English
7Dutch
8French
9 Spanish
10 Italian
11 Turkish
Values 12-23 are undefined and will default to 0. You can set values 24-31 to
specific fonts; refer to the USET command in the IGP/PGL Technical
Reference Manual.
Select LPI
This is the number of lines to be print ed per i nch. F or example, at 6 lpi there is
1/6 inch from the top of one print line to the top of the next p rint line.
Auto Uppercase
This parameter enables the printer to print text in all uppercas e when using
the ALPHA command.
•Disable. The printer will print text in upper and lowercase.
•Enable. The printer will print text in uppercase only.
Skip Cmd Prefix
This parameter determines if the printer will print any data befor e a PGL
command is received.
•Enable. The printer ignores all data on the current line before an IGP
command.
•Disable. The printer will print all data on the current line before an IGP
command.
Power on IGP/PGL
You can set the IGP feature so that it is enabled or disabled when the printer
is powered on.
•Enable. The PGL is enabled when the printer is powered on. (The PGL
feature is initialized in the Normal mode.)
•Disable. The PGL is disabled when the printer is powered on. (Th e PGL
feature is initialized to the Quiet mode.)