Chapter 4 Emulation Menu

Define CR Code

The Define CR Code option controls the action of the printer when it receives a Carriage Return code (hex 0D) from the host computer. If this feature is enabled, each time the printer receives a Carriage Return, it inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the host computer sends Line Feeds to the printer.

CR = CR. Does not insert an extra Line Feed after each Carriage Return.

CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.

Auto LF

This option defines the printer actions when print data is received past the forms width setting.

Enable. Performs an automatic carriage return and line feed when data is received past the forms width.

Disable. Discards any data past the forms width.

Define LF Code

The Define LF Code option controls the action of the printer when it receives a Line Feed code (hex 0A) from the host computer. If this feature is enabled, each time the printer receives a Line Feed, it inserts an additional Carriage Return code (hex 0D) into the data stream. This feature is required if the host computer does not send Carriage Returns to the printer.

LF = LF. Does not add a Carriage Return with a Line Feed.

LF = CR + LF. Adds an extra Carriage Return with each Line Feed.

Printer Select

Disable. Ignores the ASCII DC1 and DC3 control codes.

Enable. Disables the printer when a DC1 control code is received, and enables the printer when a DC3 control code is received.

Character Set

This parameter selects a character set for the Epson emulation, as shown in the Character Set menu. Note that when OCR-A or OCR-B is selected as the print language, the Font Attribute Typeface option under the LinePrinter Plus menu (page 86) is changed to OCR-A or OCR-B, respectively.

20 CPI Condensed

Condensed print characters are narrower than the normal character set. This is helpful for applications for which you need to print the maximum amount of information on a page.

Enable. Prints about 60 percent of the width of normal characters when condensed print is chosen by the host computer. For example, a 12 CPI Draft font will condense to 20 CPI.

Disable. Does not condense print widths, even if condensed print is chosen by the host.

96

Page 96
Image 96
Printronix P5000LJ user manual Define CR Code, Printer Select