Printronix P5000LJ user manual Truncate Alpha

Chapter 4 Emulation Menu

Truncate Alpha

When enabled, this parameter prevents the printing of Error 48 (Element Off Page Error) if alphanumeric data, including spaces, extends beyond the right side of the form.

True Vert 1/10

•Disable. A vertical 1/10 of an inch parameter is used as 7/72 of an inch. The absolute move is slightly smaller than expected. For example, a one inch move would be 70/72 of an inch. Vertical moves that have the same value will be identical in length.

•Enable. A vertical 1/10 of an inch parameter is used as 1/10 of an inch.

Rounding occurs to the nearest 1/72 of an inch. This can cause vertical moves that have the same value to differ by ± 1/72 of an inch.

Absorb after ^PY

•Absorb Motion. Prevents paper motion following a system terminator in a graphics ^PY command.

•Absorb All. The system ignores all the data and terminator until a host-generated terminator is detected.

•Disable. System terminators following a graphics command are sent to the printer and result in paper motion.

UPC Descenders

•Disable. UPC/EAN bar codes are printed without descenders if there is no human readable data.

•Enable. UPC/EAN bar codes are printed with descenders, even if there is no human readable data.

Rot. Char Size

•Adjusted. Rotated (clockwise/counterclockwise), expanded characters have a different size than an unrotated character with the same size parameters.

•Not Adjusted. Rotated, expanded characters will be the same size as unrotated characters with the same size parameters.

Ignore Spaces

•Disable. Trailing spaces are not deleted from alphanumeric elements in a graphics pass.

•Enable. Trailing spaces are deleted from alphanumeric elements in a graphics pass.

110