Printronix P5000LJ user manual HP e3000 / MPE-XL / MPE / iX DTC Configuration

MPE-XL / MPE / iX Typical Configuration

Restarting at the point of interruption when a particular spool file is reprinted after being interrupted previously by a command

In this case, a spool file is reprinted after being interrupted by a command such as spoolf #0 nnn;defer. For P5000LJ printers, when the spool file is undeferred, after being interrupted with the deferred option, a silent run (PLR) will occur up until the page following the last one printed.

A spool file can also be interrupted with the spooler ldev; stop command, but this command should be avoided for a P5000LJ printer connected to the network with the NIC. This is due to network printing problems with stopping mid-file server.

HP e3000 / MPE-XL / MPE / iX: DTC Configuration

MPE-XL / MPE / iX Typical Configuration

Within NMMGR follow the menu:
Open Config
DTS
Go to Profiles
Add or
Modify
Printer Type [22]	(21, 22, or 26)
or Printer Type File Name _______
Line Speed [9600]	(300 through 38400)
Record Width [132]	(1 . . . 2048 bytes)
Modem Type [0]	(0-None, 1-US, 2-Europe)
Parity [NONE]	(None, Even, Odd, 0's, 1's)
Initially Spooled [Y]	(Y,N)
Device Class . . . user's choice
Save Data
Prior Screen . . . twice
Go to DTC
Config Card
Assign Profile to LDEV
Save Data
Validate Link/DTX

173