Xantrex Technology PROsine 2.0 Default Values for the PROsine System, 1PROsine Default Values

Default Values for the PROsine System

Default Values for the PROsine System

Table 1-1 lists the default settings for the PROsine system. Record your settings in the right-hand column after you have configured the PROsine. This information will be valuable if you need to reconfigure your system or call Xantrex Customer Service

Table 1-1PROsine Default Values

Item

NOTE

Default Value

Your Settings

At a minimum, configure the items marked with a ** after installation.

Adjustable From the Configure PROsine—Basic Menu

AC Breaker Size

15 amps

**

Adjustable From the Configure PROsine—Advanced Menu

Load Sensing	Disabled
Load Sense Power	100 Watts
Load Sense Interval	1 second
Low AC Transfer (V)	90V
Low AC Transfer (Hz)	55Hz
Hi AC Transfer (V)	130V
Hi AC Transfer (Hz)	65Hz
AC Series Mode	Standalone
Inverter Low V Shutdown	10V
Inverter Low V Warning	+0.5V
Iverter Low V Restart	2.5V
Hysteresis
Run Without Panel	NO
Inverter Enabled on Reset	Disabled
Without Panel
Charger Enabled on Reset	Disabled
Without Panel
Auto Restart After Error	NO	**
Adjustable From the Configure Display Panel Menu
Audible Alarm	OFF
LCD Backlight Mode	Auto
LCD Backlight Brightness	50%
LCD Backlight Timeout	20 seconds
Temperature	Farenheit

445-0089-01-01 1–9