Xantrex Technology PROsine 2.0 user manual Materials List

Materials List

Important:

pDC Wiring Enclosure

For residential installations, some installation codes may require a wiring enclosure for DC connections and cables. (Installation procedures are shipped with the DC Wiring Enclosure.)

pCrimp-On Ring Terminals (for DC Wiring Enclosure)

If you are using the DC Wiring Enclosure, you should use crimp-on ring terminals on the PROsine end of your DC cables. Most box connectors (set screw types) are too large to fit in the enclosure without the risk of the connector shorting to the wall of the DC Wiring Enclosure. Do not use any connector that does not provide at least 2mm clearance to the inside wall with the wire in place and the set screw tightened.

pSeries Sync Cable

If you are connecting two PROsine’s in series, you will need a Series Sync cable. This is a standard 4-connector telephone cable and may be purchased from most electronics retailers.

Contact Xantrex or your distributor about the Wiring Enclosure. Purchase the crimp-on ring terminals from a local supplier.

If any of these materials are missing or are unsatisfactory in any manner, please contact Customer Service. See page WA–1.

445-0089-01-01 1–7