Xantrex Technology PROsine 2.0 user manual LCD Panel, Data Display Mode, Configuration Mode

Product Orientation

LCD Panel

The LCD panel lets you monitor the PROsine system and change its configuration settings. It operates in two basic modes: Data Display and Configuration.

Data Display Mode

•In Data Display mode the screens provide information about PROsine system performance.

•You can cycle through them by pressing the Up s and Down t Menu buttons. (In Data Display mode, the other buttons have no function.)

•Typically, the top line indicates the type of data being displayed and the actual data appears on the bottom line. A sample screen is shown below:

PROsine: Battery 12.0V +10A 22°C

•Examples of all the Display screens are shown on page 5–10.

Configuration Mode

•In Configuration mode, the screens show data that can be changed as well as read-only data. (For details about each Configuration screen, see, Chapter 4, “Configuration”.) Using these screens, you can:

•Define the operating parameters of the PROsine (including AC breaker size, battery size, battery type, types of charge, load sense capability, etc.)

•Adjust the display characteristics of the panel (including an audible alert, screen contrast, and screen backlighting)

•View current operational data, Warning messages, Error messages, and Panel fault messages in order to monitor and troubleshoot system performance

•Two sample screens are shown below:

Menu 1: Configure PROsine—General

AC Breaker Size *15A

2–10 445-0089-01-01