Xantrex Technology PROsine 2.0 user manual AC Input Connections, To make the AC input connections

Installation

AC Input Connections

Figure 3-4 is a cutaway top view of the PROsine wiring compartment. It shows one incoming AC cable and its connections to the PROsine wires.

To make the AC input connections:

1.Run 10AWG 2-conductor-plus-ground cable through one of the cable clamps on the AC end.

2.Strip about two inches of the jacket from the AC cable and separate the three wires.

3.Connect the incoming black and white (line and neutral) wires to the PROsine AC input black and white wires.

4.Connect the incoming ground wire to the screw on the chassis marked . Use a crimp-on ring terminal if the AC input ground wire is stranded. Solid wire can be screwed directly under the head of the screw.

grounding screw	Cutaway view of
	PROsine wiring
	compartment as
	see	n fr	om the top.

		wire nuts or crimp
		connections (depending
AC cable		on type of installation)
		clamp
	for AC cable

Figure 3-4Incoming AC Cable (Top, cutaway view of wiring compartment)

3–12 445-0089-01-01