Xantrex Technology PROsine 2.0 user manual Display Panel Faults, Internal Error nnnn

Display Panel Faults

Display Panel Faults

A message is displayed for any fault that is detected in the display panel. If a Panel Fault message appears, you can clear it from the screen by pressing any button on the panel. Since this type of fault does not trigger a shutdown, operation of the system after the error occurs depends on the type of fault and the setup of the system.

You can view the last ten Panel Fault messages by placing the unit in Configure mode and then selecting View Last 10 Panel Faults from the Diagnostics menu. The most recent fault is displayed first.

The majority of Panel Fault messages appear as

Internal Error nnnn

where nnnn is the number of the error.

If one of these errors causes the PROsine to shut down, attempt to restart the unit. If the error occurs again, call Xantrex.

Other faults are listed in Table 6-4.

Table 6-4Panel Faults

Panel Faults	Error	Details
Panel Fault:	External communications	No transmission has been received for 2 seconds.
COMM1 Timeout	timeout Comm. Port 1	Check the communications cable between the display
		panel and the PROsine as well as the connectors.
Panel Fault:	External communications	No transmission has been received for 2 seconds.
COMM2 Timeout	timeout Comm. Port 2	Check the communications cable between the display
		panel and the PROsine as well as the connectors.
Panel Fault:	Menu data failed to be sent.	After 5 retries, the data being altered on a menu could
Data Not Sent		not be updated to the destination device.
Panel Fault:	The panel’s internal memory has	The panel will not work.
Panel Unusable	been corrupted.	The PROsine itself is not affected and will continue to
		operate if you have selected Run Without Panel.

445-0089-01-01 6–9