Xantrex Technology PROsine 2.0 Important Safety Instructions, WARNINGLimitations on use

Important Safety Instructions

WARNING

This chapter contains important safety and operating instructions. Read and keep this

User’s Manual for future reference.

WARNING:Limitations on use

The PROsine 2.0 Inverter/Charger is not intended for use in connection with life support systems or other medical equipment or devices.

1.Before installing and using the PROsine 2.0 Inverter/Charger (PROsine), read all instructions and cautionary markings on the PROsine, the batteries, and all appropriate sections of this Manual.

2.Do not expose the PROsine to rain, snow, spray, or bilge water. To reduce risk of fire hazard, do not cover or obstruct the ventilation openings. Do not install the PROsine in a zero-clearance compartment. Overheating may result.

3.Use only attachments recommended or sold by the manufacturer. Doing otherwise may result in a risk of fire, electric shock, or injury to persons.

4.The PROsine is designed to be permanently connected to you AC and DC electrical systems. Xantrex recommends that all wiring be done by a certified technician or electrician to ensure adherence to proper electrical wiring regulations.

5.To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition and that wire is not undersized. Do not operate the PROsine with damaged or substandard wiring.

6.Do not operate the PROsine if it has received a sharp blow, been dropped, or otherwise damaged in any way. If the PROsine is damaged, see the Warranty section.

7.Do not disassemble the PROsine. It contains no user-serviceable parts. See the Warranty section for instructions on obtaining service. Attempting to service the PROsine yourself may result in a risk of electrical shock or fire. Internal capacitors remain charged after all power is disconnected.

8.To reduce the risk of electrical shock, disconnect both AC and DC power from the PROsine before attempting any maintenance or cleaning or working on any circuits connected to the PROsine. Turning off controls will not reduce this risk.

9.The PROsine must be provided with an equipment-grounding conductor connected to the AC input ground terminal. Grounding and all other wiring must comply with local codes and ordinances.

445-0089-01-01 vii