Xantrex Technology PROsine 2.0 Next Steps, 11Cabling Details for Remote Shutdown Feature

Step 10: Connecting the Remote Shutdown

Plug into Battery Temp		1:2 phone	Battery Temperature
jack on PROsine		line splitter	Sensor cable
			RS+
	10 feet max.		Do not
		100 feet max.
			use.
	26AWG, 4-conductor telephone cable		RS–

NOTE: The retaining clip is on the opposite side of the connector.

Top view of cable and connector RS+

Do not use.

RS–

Figure 3-11Cabling Details for Remote Shutdown Feature

**

** Do not connect to these wires; they are used for the Battery Temperature Sensor.

Figure 3-12Schematic for Remote Shutdown Feature

Next Steps

At this point, you have installed the PROsine system and are now ready to configure it.

1.Read the configuration procedures in Chapter 4, “Configuration”.

2.Reconnect the AC shorepower supply.

3.Use the display panel to configure the PROsine.

445-0089-01-01 3–25