Xantrex Technology PROsine 2.0 user manual Part 5 Display Mode Screens, PROsine Battery

Operation

Part 5: Display Mode Screens

When the DISPLAY switch is ON, you can view the screens shown below. (The values shown here are examples only.) Display Mode screens are updated continuously to show current PROsine operating data. You can scroll through them by pressing the Up s and Down t MENU buttons.

Important: In the screens below current polarity is indicated as follows:

+indicates current going into the battery (i.e. + indicates charging).

–indicates current coming out of the battery (i.e. – indicates that the battery is supplying loads or the PROsine is inverting).

Screen 1

PROsine: Battery 12.0V +10A 22°C

OR

PROsine: Battery

12.0V +10A

Shows the PROsine’s voltage and current readings from the battery as well as the battery temperature. If the battery temperature sensor is not installed, the screen on the right is displayed.

Screen 2

PROsine: AC In 118.0V 5A 58Hz

Shows the voltage, current, and frequency of the shorepower (i.e. input AC).

Screen 3

PROsine: AC Out 120.0V 10A 60Hz

Shows the voltage, current, and frequency of the output AC.

Screen 4

12.0V –120A 22°C

120V 10A 60Hz

OR

12.0V –120A

120V 10A 60Hz

Combines the battery display (Screen 1) with the AC output display (Screen 3).

The left-hand screen appears if the battery temperature sensor is installed. Output AC is shown on the bottom. The PROsine’s voltage and current readings from the battery as well as the battery temperature appear on top.

The bottom of the right-hand screen shows the output AC. The top shows battery voltage and current as read by the PROsine. (This is the screen that appears if the battery temperature sensor is not installed.)

5–10 445-0089-01-01