Problem | Possible Cause | Solution |
|
|
|
Display error message: | Component failure. | Call Service. |
Exxxx |
|
|
Call Service |
|
|
(where xxxx defines |
|
|
an error) |
|
|
or |
|
|
MOTOR FAULT |
|
|
Call Service |
|
|
or |
|
|
UPLOAD LANGUAGES |
|
|
Call Service |
|
|
or |
|
|
DATA LOST |
|
|
Call Service |
|
|
|
|
|
The following message | The Data Card is not inserted | Ensure that the Data Card is |
is displayed on the | correctly. | inserted with the arrow facing up |
LCD after you try to |
| and pointing towards the device. |
update settings using |
| Ensure that the device is switched |
the Data Card: |
| on and in standby mode before |
Card Error |
| you insert the Data Card. |
Remove Card |
|
|
ENGLISH
The Data Card is only partly inserted.
You may have removed the Data Card before settings were copied to the S8 Escape.
Ensure that the Data Card is inserted into the slot on the Data Card module as far as it will go.
Reinsert the Data Card and wait
for the Settings Success Remove Card message to appear on the LCD.
The card is not a ResScan Data | Only use a ResScan Data Card. |
Card. |
|
The following message is displayed on the LCD after you try to copy data to a Data Card:
Card Error
Remove Card
The Data Card is not inserted correctly.
The card is not a ResScan Data Card.
Ensure that the Data Card is inserted with the arrow facing up and pointing toward the device.
Use a ResScan Data Card, as specified in this manual.
The following message is displayed on the LCD after you try to update the settings using the Data Card:
Settings Invalid
Remove Card
The identification details on the | Contact your clinician |
Data Card do not match the | immediately. |
details on your device. |
|
TROUBLESHOOTING 27