You can delete jobs scheduled for the selected components and/or devices across one or more servers.

Deleting Scheduled Server Component Firmware Jobs Using the Web

Interface
To delete scheduled server component firmware jobs:
1. In the left pane, click Server Overview, and then click Update.
2. On the Server Component Update page, filter the component or device (optional).
3. In the Job Status column, if a check box is displayed next to the job status, it implies that a Lifecycle
Controller job is in progress and currently in the indicated state. It can be selected for a job-deletion
operation.
4. Click Delete Job. The jobs are deleted for the selected components or devices.
Updating Storage Component Using CMC Web Interface
Make sure the DUPs for the required storage components are downloaded.
To update the storage components:
1. In the left pane, click Chassis Overview → Storage → Update.
2. On the Storage Component Update page, click Browse.
The Choose to Upload File dialog box is displayed
3. Browse to location where the required DUP file was downloaded and saved from the Dell support
Site and select the DUP file, and click Open.
The DUP file name and path are displayed in the Browse field.
4. Click Upload.
The DUP is uploaded to CMC. The Storage Component Update section displays only the
components that are supported by the downloaded DUP file. The current version, latest available
version and the Update check box are displayed for the components.
5. Select the appropriate Update check boxes for the required components.
6. Click Update.
The firmware update action is initiated for the selected components. The progress is displayed in the
Update column
After the action is complete, an appropriate message is displayed to indicate the completion or
failure of the firmware update.
NOTE: Servers must be turned off before updating the firmware.
Recovering iDRAC Firmware Using CMC
iDRAC firmware is typically updated using iDRAC interfaces such as the iDRAC web interface, the SM-CLP
command line interface, or operating system specific update packages downloaded from
support.dell.com. For more information, see the iDRAC User’s Guide.
Early generations of servers can have corrupted firmware recovered using the new update iDRAC
firmware process. When CMC detects corrupted iDRAC firmware, it lists the server on the Firmware
Update page. Complete the tasks mentioned in the Updating Server iDRAC Firmware.
68