#Donnie Barnes

#Default runlevel. The runlevels used by RHS are:

#0 - halt (Do NOT set initdefault to this)

#1 - Single user mode

#2 - Multiuser, without NFS (The same as 3, if you

#do not have networking)

#3 - Full multiuser mode

#4 - unused

#5 - X11

#6 - reboot (Do NOT set initdefault to this)

#

id:3:initdefault:

#System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6

#Things to run in every runlevel. ud::once:/sbin/update

#Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now

#When our UPS tells us power has failed, assume we have a few

#minutes of power left. Schedule a shutdown for 2 minutes from now.

#This does, of course, assume you have power installed and your

#UPS is connected and working correctly. pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"

#If power was restored before the shutdown kicked in, cancel it. pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"

#Run gettys in standard runlevels co:2345:respawn:/sbin/agetty -h-L 57600 ttyS1 ansi

1:2345:respawn:/sbin/mingetty tty1 2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/mingetty tty5 6:2345:respawn:/sbin/mingetty tty6

#Run xdm in runlevel 5

#xdm is now a separate service x:5:respawn:/etc/X11/prefdm -nodaemon

Edit the /etc/securettyfile as follows:

Add a new line, with the name of the serial tty for COM2:

ttyS1

The following example shows a sample file with the new line.

vc/1

vc/2

vc/3

158

Page 158
Image 158
Dell manual TtyS1, Vc/1 Vc/2 Vc/3