4.Click Apply.

Configuring PCIe Ride-through Properties Status Using RACADM

You can configure the PCIe power ride-through properties, by running the following commands:

To disable the Ride-through feature, run the command, racadm setpciecfg ridethru –d

To enable the Ride-through feature, run the command, racadm setpciecfg ridethru –e

To reset the Ride-through timeout property, run the command, racadm setpciecfg ridethru – t <timeout>

To set the acceptable timeout range, run the command, racadm setpciecfg help ridethru

For more information, see the Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide.

204

Page 204
Image 204
Dell 2 manual Configuring PCIe Ride-through Properties Status Using Racadm