Dell 2 Configuring Standard Schema Active Directory

Role Group Default Privilege Level Permissions Granted Bit Mask
• Test Alert User
• Debug Command
Administrator
• Fabric A
Administrator
2 None • CMC Login User
• Clear Logs
Administrator
• Chassis Control
Administrator (Power
Commands)
• Server Administrator
• Test Alert User
• Fabric A
Administrator
0x00000ed9
3 None CMC Login User 0x00000001
4 None No assigned permissions 0x00000000
5 None No assigned permissions 0x00000000
NOTE: The Bit Mask values are used only when setting Standard Schema with the RACADM.
NOTE: For more information about user privileges, see Types of Users.
Configuring Standard Schema Active Directory
To configure CMC for an Active Directory login access:
1. On an Active Directory server (domain controller), open Active Directory Users and Computers
Snap-in.
2. Using the CMC Web interface or RACADM:
a. Create a group or select an existing group.
b. Configure the role privileges.
3. Add the Active Directory user as a member of the Active Directory group to access CMC.
Configuring Active Directory With Standard Schema Using CMC Web Interface
NOTE: For information about the various fields, see the CMC Online Help.
1. In the left pane, go to Chassis Overview, and then click User Authentication → Directory Services.
The Directory Services page is displayed.
2. Select Microsoft Active Directory (Standard Schema). The settings to be configured for standard
schema is displayed on the same page.
3. In the Common Settings section, specify the following:
• Select Enable Active Directory and enter the timeout value for Active Directory in the AD
Timeout field.
• To obtain the Active Directory Domain Controllers from a DNS lookup select Look Up Domain
Controllers with DNS, and then select one of the following:
127