7.From the Protocol drop-down menu, select All Protocols or one of the listed network protocols to view all the MACS or the MACs associated with the selected protocol.

8.In the WWN/MAC Addresses field, enter a partial MAC address or the full MAC address to view only the slots associated with the specific MAC address.

9.From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition status.

For information about the fields, see the Online Help.

Viewing Advanced WWN/MAC Address Information Using Web Interface

To view WWN/MAC Address Information for each server slot or all servers in a chassis, in the advanced mode:

1.Click Server Overview Properties WWN/MAC

The WWN/MAC Summary page displays the WWN/MAC Address Information.

2.From the View drop-down menu, select Advanced, to view the WWN/MAC Addresses attributes in detailed view.

In the WWN/MAC Addresses table displays Server Slot, Fabric, Protocol, WWN/MAC addresses, Partition Status, and the MAC address assignment type — Server assigned, FlexAddress, or I/O Identity MAC. A black check mark indicates the active address type, either server-assigned, chassis-assigned, or remote assigned. MAC.

3.In the WWN/MAC Addresses table, click Export to save the WWN/MAC addresses locally.

4.Click the against a slot or click Expand/Collapse All to expand or collapse the attributes listed for a specific slot or all the slots in the WWN/MAC Addresses table.

5.From the Server Slot drop-down menu, select All Servers or a specific Slot to view the WWN/MAC Addresses attributes for all servers or servers in specific slots only respectively.

6.From the Fabric drop-down menu, select one of the fabric types to view details for all or specific type of management or I/O fabric associated with the servers.

7.From the Protocol drop-down menu, select All Protocols or one of the listed network protocols to view all the MACS or the MACs associated with the selected protocol.

8.In the WWN/MAC Addresses field, enter the MAC address to view only the slots associated with the specific MAC address.

9.From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition status.

If a particular partition is disabled, the status is displayed as Disabled and the row displaying the partition is greyed out.

For information about the fields, see the Online Help.

Viewing WWN/MAC Address Information Using RACADM

To view WWN/MAC address information for all servers or specific servers using RACADM, use the getflexaddr and getmacaddress subcommands.

To display Flexaddress for the entire chassis, use the following RACADM command:

racadm getflexaddr

167

Page 167
Image 167
Dell 2 manual Viewing WWN/MAC Address Information Using Racadm, Racadm getflexaddr