Dell 2 $racadm setflexaddr Error Insufficient user, Privileges to perform, $racadm feature -d -c

Situation Command Output

SD card in the active CMC module that is bound to the same service tag.

SD card in the active CMC module that is not bound to any service tag.

FlexAddress feature not active on the chassis for any reason (No SD card inserted/ corrupt SD card/ after feature deactivated /SD card bound to a different chassis).

$racadm featurecard -s

$racadm featurecard -s

$racadm setflexaddr [-f <fabricName> <slotState>]

$racadm setflexaddr [-i <slot#> <slotstate>]

FlexAddress: bound to another chassis, svctag = <Service tag Number> SD card SN = <Valid flex address serial number>

The feature card inserted is valid and contains the following feature(s)

FlexAddress: bound

The feature card inserted is valid and contains the following feature(s)

FlexAddress:not bound

ERROR: Flexaddress feature is not active on the chassis

Guest user attempts to set FlexAddress on slots/fabrics.

$racadm setflexaddr	[-f	ERROR: Insufficient user
<fabricName> <slotState>]		privileges to perform
$racadm setflexaddr	[-i	operation
<slot#> <slotstate>]

Deactivating FlexAddress feature	$racadm feature -d -c
with chassis powered ON.	flexaddress

ERROR: Unable to deactivate the feature because the chassis is powered ON

Guest user tries to deactivate the	$racadm feature -d -c
feature on the chassis.	flexaddress
Changing the slot/fabric	$racadm setflexaddr -i 1
FlexAddress settings while the	1
server modules are powered ON.
Changing the Flexaddress	$racadm setflexaddr -
settings of slot or fabric, when	i<slotnum> <status>
the CMC Enterprise License is	$racadm setflexaddr -
not installed.	f<FabricName> <status>

ERROR: Insufficient user privileges to perform operation

ERROR: Unable to perform the set operation because it affects a powered ON server

ERROR: SWC0242 : A required license is missing or expired. Obtain an appropriate license and try again, or contact your service provider for additional details.

169