to the Deploy iDRAC page, select Server Overview → Setup → iDRAC. Profiles that can be deployed are
stored in the SD card or remote share.
NOTE:
To set up the profiles for quick deploy, you must have Chassis Administrator privileges.
Assigning Server Profiles to Slots
The Server Profiles page enables you to assign server profiles to slots. To assign a profile to the chassis
slots:
1. On the Server Profiles page, click Profiles for QuickDeploy.
The current profile assignments are displayed for the slots in the select boxes contained in the Assign
Profile column.
NOTE: You can perform the Quick Deploy action only if the Action When Server is Inserted
option in the Deploy iDRAC page is set to Server Profile or Quick Deploy then Server Profile.
Selecting this option allows to apply the server profile assigned when a new server is inserted in
the chassis.
2. From the drop-down menu, select the profile to assign to the required slot. You can select a profile
to apply to multiple slots.
3. Click Assign Profile.
The profile is assigned to the selected slots.
NOTE:
• A slot that does not have any profile assigned to it is indicated by the term “No Profile Selected”
that appears in the select box.
• To remove a profile assignment from one or more slots, select the slots and click Remove
Assignment A message is displayed warning you that removing a profile from the slot or slots
removes the configuration settings in the profile from any server (s) inserted in the slot (s) when
Quick Deploy Profiles feature is enabled. Click OK to remove the profile assignments.
• To remove all profile assignments from a slot, in the drop-down menu, select No Profile
Selected.
NOTE: When a profile is deployed to a server using the Quick Deploy Profiles feature, the progress
and results of the application are retained in the Profile Log.
NOTE:
• If an assigned profile is on the Network Share which is not accessible when a server is inserted in
the slot, the LCD displays a message that the assigned profile is not available for Slot <X>.
• The Network Share option is enabled and the details are displayed in the Stored Profiles section
only if the network share is mounted and is accessible. If the Network Share is not connected,
configure the Network Share for the chassis. To configure the Network Share, click Edit in the
Stored Profiles section. For more information, see Configuring Network Share Using CMC Web
Interface.
111