4.Click Begin Firmware Update, and then click Yes.

The Firmware Update Progress section provides firmware update status information. While the image file uploads, a status indicator displays on the page. File transfer time varies on the basis of connection speed. When the internal update process begins, the page automatically refreshes and the firmware update timer is displayed.

Additional instructions to follow:

Do not click the Refresh icon, or navigate to another page during the file transfer.

The Update State field displays the firmware update status.

When the update is complete, there is a brief loss of connectivity to the main board, because it resets and the new firmware is displayed on the Firmware Update page.

Updating Chassis Infrastructure Firmware Using RACADM

To update chassis infrastructure firmware using RACADM, use the fwupdate sub-command. For more information about using the RACADM commands, see the Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide.

Updating Server iDRAC Firmware

You can update firmware for iDRAC using the CMC Web interface or the RACADM. To use this feature, you must have an Enterprise License.

The iDRAC firmware version must be 1.40.40 or later for servers with iDRAC.

The iDRAC (on a server) resets and is temporarily unavailable after a firmware update.

NOTE: To update an iDRAC firmware using the Chassis Management Controller, an SD card must be available in the chassis. However, to update the iDRAC firmware through the iDRAC Web interface, an SD card is not required in CMC. For more information on launching iDRAC Web interface from CMC, see Launching iDRAC from Server Status Page.

Updating Server iDRAC Firmware Using Web Interface

To update the iDRAC firmware in the server:

1.Go to any of the following pages:

Chassis Overview Update.

Chassis Overview Chassis Controller Update.

Chassis Overview I/O Module Overview Update.

The Firmware Update page is displayed.

NOTE:

You can also update server iDRAC firmware using Chassis Overview Server Overview Update. For more information, see Updating Server Component Firmware.

2.To update the iDRAC7 or iDRAC8 firmware, in the iDRAC7 Firmware or iDRAC8 Firmware section respectively, click the Update link of the server for which you want to update the firmware.

The Server Component Update page is displayed. To continue, see Updating Server Component Firmware.

55

Page 55
Image 55
Dell 2 manual Updating Server iDRAC Firmware, Updating Chassis Infrastructure Firmware Using Racadm