Dell 2 manual Dhcp, IPs will auto-increment by slot number, Enter slot 1 starting IP

•Yes: Select the check icon then press the center button.

You can also configure iDRAC from the CMC web interface.

12.On the Protocol panel, select the IP type that you want to use for the servers:

•IPv4 — The options DHCP or Static are displayed.

•Both

—The options DHCP or Static are displayed.

•IPv6

—The iDRAC Configuration panel is displayed. Go to step 15.

13.Select DHCP or Static.

Dynamic Host	iDRAC retrieves IP configuration (IP address, mask, and gateway)
Configuration Protocol	automatically from a DHCP server on your network. The iDRAC is
(DHCP)	assigned a unique IP address allotted over your network. Press the
	center button. The IPMI Over LAN panel is displayed.
Static	If you select Static, manually enter the IP address, gateway, and
	subnet mask by following the instructions on the LCD screen.
	If you have selected the Static option, press the center button, and
	then do the following:
	a.	The following message asks you whether or not you want to
		automatically increment by using the IP of Slot–1.
		IPs will auto-increment by slot number.
		Click the center button. The following message asks you to
		enter the slot–1 IP number.
		Enter slot 1 (starting) IP
		Enter the slot–1 IP number, and then press the center button.
	b.	Set the Subnet mask, and then press the center button.
	c.	Set the gateway, and then press the center button.
	d.	The Network Summary screen lists the Static IP Address,
		Subnet Mask, and Gateway settings you entered. Check the
		settings for accuracy. To correct a setting, press appropriate
		buttons, and then press the center button.
	e.	When you have confirmed the accuracy of the settings you
		entered, go to step 10.

The IPMI Over LAN panel is displayed.

14.From the The IPMI Over LAN panel ,select Enable or Disable to enable or disable IPMI over LAN. Press the center button to continue.

15.On the iDRAC Configuration panel, the following message is displayed.

Apply settings to installed servers?

To apply all iDRAC network settings to the installed servers, select the check icon , and then press the center button. Else, select the ‘X’ icon and press the center button.

16.On the next iDRAC Configuration panel, the following message is displayed.

Auto-Apply settings to newly-inserted servers?

To apply all iDRAC network settings to the newly installed servers, select the check icon and press the center button. When a new server is inserted in the chassis, the LCD prompts you whether or not

35