Dell 2 manual Minimum CMC Version, Supported Remote Access Connections

Ite	Indicator, Button, or	Description
m	Connector
7	Information tag	A slide-out label panel which allows you to record system
		information such as Service Tag, NIC, MAC address, the system's
		electrical rating, and Worldwide Regulatory Agency marks.
8	Optical drive (optional)	One optional SATA DVD-ROM drive or DVD+/-RW drive.
9	Vents	Vents for the temperature sensor.
		NOTE: To make sure about proper cooling, verify that the
		vents are not blocked.
10	Video connector	Allows a monitor to be connected to the system.
11	Server modules	Up to four PowerEdge M520, M620, or M630 server modules or 2
		M820 server modules specifically configured for the enclosure.

Minimum CMC Version

The following table lists the minimum CMC version required to enable the listed server modules.

Table 1. Minimum CMC Version for server modules

Servers	Minimum version of CMC
PowerEdge M520	CMC 1.36
PowerEdge M620	CMC 1.36
PowerEdge M820	CMC 1.36
PowerEdge M630	CMC 2.00

The following table lists the minimum CMC version required to enable the listed I/O moduless.

Table 2. Minimum CMC Version for I/O modules

IOM Switches	Minimum version of CMC
R1 VRTX 1Gb Pass-through	CMC 1.20
R1-2401 ROBO 1Gb Switch Module	CMC 1.20
R1-2210 VRTX 10Gb Switch	CMC 2.00

Supported Remote Access Connections

The following table lists the supported Remote Access Controllers.

Table 3. Supported Remote Access Connections

ConnectionFeatures

CMC Network Interface ports • GB port: Dedicated network interface for the CMC web interface.

•DHCP support.

•SNMP traps and e-mail event notification.

•Network interface for the iDRAC and I/O Modules (IOMs).

20