indicating the situation and the operation must not be submitted. Wait for the operation in process to complete and then submit the operation again.

Do not navigate away from the page after an operation is submitted for scheduling. If an attempt is made, a confirmation message is displayed allowing the intended navigation to be cancelled. Otherwise, the operation is interrupted. An interruption, especially during an update operation may cause the firmware image file upload to be terminated before proper completion. After an operation has been submitted for scheduling, ensure that the confirmation message indicating that the operation has been successfully scheduled is acknowledged.

Reinstalling Server Component Firmware

You can reinstall the firmware image of the currently installed firmware for selected components or devices across one or more servers. The firmware image is available within the Lifecycle Controller.

Re-installing Server Component Firmware Using Web Interface

To reinstall a server component firmware:

1.In the left pane, click Server Overview Update.

2.On the Server Component Update page, in the Choose Update Type section, select Update from File.

3.In the Current Version column, select the option for the component or device for which you want to reinstall the firmware.

4.Select one of the following options:

Reboot Now — Restart the server immediately.

On Next Reboot — Manually restart the server at a later time.

5.Click Reinstall. The firmware version is reinstalled for the selected component or device.

Rolling Back Server Component Firmware

You can install the firmware image of the previously installed firmware for selected components or devices across one or more servers. The firmware image is available within the Lifecycle Controller for a rollback operation. The availability is subject to the version compatibility logic of the Lifecycle Controller. It also assumes the previous update was facilitated by the Lifecycle Controller.

NOTE: To use this feature, you must have an Enterprise License.

Rolling Back Server Component Firmware Using the CMC Web Interface

To roll back the server component firmware version to an earlier version:

1.In the left pane, click Server OverviewUpdate.

2.On the Server Component Update page, in the Choose Update Type section, select Update from File.

3.In the Rollback Version column, select the option for the component or device for which you want to roll back the firmware.

4.Select one of the following options:

Reboot Now — Restart the server immediately.

On Next Reboot - Manually restart the server at a later time.

64

Page 64
Image 64
Dell 2 manual Rolling Back Server Component Firmware, Reinstalling Server Component Firmware