5: Commands and Levels
PremierWave XN Command Reference 54
clrscrn
Clears the screen.
diagnostics
Enters the diagnostics level.
exit
Exits to the enable level.
ftp
Enters the ftp level.
host <number>
Change to config host level
http
Enters the http level.
icmp
Changes to the command level for ICMP configuration
and status.
if <instance>
Changes to the interface configuration level.
ip
Changes to the command level for IP configuration and
status.
kill ssh <session>
Kills SSH session with index from "show sessions"
kill telnet <session>
Kills Telnet session with index from "show sessions"
query port
Enters the query port level.
rss
Change to menu level for RSS configuration and status
show
Displays system information.
show history
Displays the last 20 commands entered during the current
CLI session.
smtp Changes to the command level for SMTP configuration
and status.
syslog
Enters the syslog level.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be con-
figured.
terminal network
Enters the configure-terminal level for the network.
vip
Change to menu level for VIP configuration and status
wlan profiles
Enters the WLAN profiles configuration level.
write
Stores the current configuration in permanent memory.
connect (tunnel-connect:2) level commands
block network disable Forwards (tunnels) network data in connect mode tunne-
ling.
block network enable
Discards all data coming in from the connect mode tunnel
before forwarding
it to the serial interface (generally used for debugging).
block serial disable
Forwards (tunnels) serial data in connect mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
it to the connect mode tunnel (generally used for debug-
ging).
clrscrn
Clears the screen.
connect mode always
Enables the tunneling server to always establish tunneling
connections.
connect mode any character Enables the tunneling server to establish a tunneling con-
nection when a
character is received on the corresponding line (serial
port).
connect mode disable
Disables connect mode tunneling.
connect mode modem control asserted
Enables the tunneling server to make tunneling connec-
tions when the modem
control pin is asserted.
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured