Lantronix 900-607 Host 22 config-host22 level commands, Host 23 config-host23 level commands

	5: Commands and Levels
	<text> = username.
write	Stores the current configuration in permanent memory.
host 22 (config-host:22) level commands
clrscrn	Clears the screen.
default protocol	Restores the default value of the protocol (Telnet).
default remote port	Sets the remote port (used to connect to the host) to the
	default value,
	which depends on the selected protocol.
exit	Exits to the configuration level.
host <number>	Change to config host level
name <text>	Sets the name of the host.
	<text> = name of the host.
no name	Clears the name of the host.
no remote address	Clears the remote address of the host.
no ssh username	Clears the SSH username associated with the host.
protocol ssh	Sets the protocol to SSH.
protocol telnet	Sets the protocol to Telnet.
remote address <text>	Sets the IP address of the remote host to connect to when
	this host is
	selected on the login connect menu.
	<text> = IP address.
remote port <number>	Sets the remote port used to connect to the host.
	<number> = port to be used.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
ssh username <text>	Sets the username for logging into the host via SSH.
	<text> = username.
write	Stores the current configuration in permanent memory.
host 23 (config-host:23) level commands
clrscrn	Clears the screen.
default protocol	Restores the default value of the protocol (Telnet).
default remote port	Sets the remote port (used to connect to the host) to the
	default value,
	which depends on the selected protocol.
exit	Exits to the configuration level.
host <number>	Change to config host level
name <text>	Sets the name of the host.
	<text> = name of the host.
no name	Clears the name of the host.
no remote address	Clears the remote address of the host.
no ssh username	Clears the SSH username associated with the host.
protocol ssh	Sets the protocol to SSH.
protocol telnet	Sets the protocol to Telnet.
remote address <text>	Sets the IP address of the remote host to connect to when
	this host is
	selected on the login connect menu.
	<text> = IP address.
remote port <number>	Sets the remote port used to connect to the host.
	<number> = port to be used.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current

PremierWave XN Command Reference 113