5: Commands and Levels

 

 

 

mode tunneling

 

connection.

flush start character disable

Enables forwarding of the connect start character into the

 

network.

flush start character enable

Disables forwarding of the connect start character into the

 

network.

host <instance>

Enters the next lower level.

 

Specify the instance for the next lower level.

host mode sequential

Connects to the first host in the list that accepts the con-

 

nection.

host mode simultaneous

Selects simultaneous connections to all hosts on the host

 

list.

kill connection

Disconnects the active connect mode tunneling connec-

 

tion or connections.

local port <number>

Sets a specific port for use as the local port.

 

<number> = the number of the port to use.

no email connect

Discontinues sending email alerts upon establishing a

 

connect mode tunnel.

no email disconnect

Discontinues sending email alerts upon closing a connect

 

mode tunnel.

promote host <number>

Promotes the identified host, exchanging it place with the

 

host above it,

 

to adjust the order of the defined hosts.

reconnect time <milliseconds>

Sets the reconnect time value for tunneling connections

 

established by the

 

device in milliseconds.

 

<milliseconds> = timeout in milliseconds.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current

 

CLI session.

show status

Displays tunnel connect status.

start character <control>

Sets the connect mode start character.

 

The character may be input as text, control, decimal, or

 

hex.

 

A control character has the form <control>C.

 

A decimal value character has the form \99.

 

A hex value character has the form 0xFF.

write

Stores the current configuration in permanent memory.

credentials (ssl-credentials) level commands

 

clrscrn

Clears the screen.

create <credential name>

Create a new credential name

delete <credential name>

Delete existing credential by name

edit <credential name>

View or edit an existing profile

exit

Exits to the ssl level.

show

Show existing credential names

show history

Displays the last 20 commands entered during the current

 

CLI session.

write

Stores the current configuration in permanent memory.

device (device) level commands

 

auto show tlog

Continuously displays the internal trouble log.

clrscrn

Clears the screen.

exit

Exit to the enable level.

show

Show system information

PremierWave XN Command Reference

57

Page 57
Image 57
Lantronix 900-607 manual Credentials ssl-credentials level commands, Create credential name, Delete credential name