| 5: Commands and Levels |
|
|
default local port | Uses the default port number as the local port for accept |
| mode tunneling. |
| The default port is 10000 + #, where # is the line number |
| for this tunnel. |
default protocol | Restores the default protocol as "TCP". |
default start character | Defaults the accept mode start character. |
default tcp keep alive | Restores the default 45 second accept mode TCP keep |
| alive timeout. |
email connect <number> | Sets an email profile to use to send an email alert upon |
| establishing |
| an accept mode tunnel. |
| <number> = the number of the email profile to use. |
email disconnect <number> | Sets an email profile to use to send an email alert upon |
| closing |
| an accept mode tunnel. |
| <number> = the number of the email profile to use. |
exit | Returns to the tunnel level. |
flush serial disable | Characters already in the serial data buffer are retained |
| upon establishing |
| an accept mode tunneling connection. |
flush serial enable | Flushes the serial data buffer upon establishing an accept |
| mode tunneling |
| connection. |
flush start character disable | Enables forwarding of the accept start character into the |
| network. |
flush start character enable | Disables forwarding of the accept start character into the |
| network. |
kill connection | Disconnects the active accept mode tunneling connection. |
local port <number> | Sets the port to use for accept mode tunneling. |
| <number> = number of the port to use. |
no aes decrypt key | Removes the accept tunnel AES decrypt key. |
no aes encrypt key | Removes the accept tunnel AES encrypt key. |
no credentials | Clears the RSA/DSA certificate selection. |
no email connect | Discontinues sending email alerts upon establishing an |
| accept mode tunnel. |
no email disconnect | Discontinues sending email alerts upon closing an accept |
| mode tunnel. |
no tcp keep alive | Disables the accept mode TCP keep alive timeout. |
password | Enters the next lower level. |
protocol ssh | Uses SSH protocol for accept mode tunneling. |
protocol ssl | Uses SSL protocol for accept mode tunneling. |
protocol tcp | Uses TCP protocol for accept mode tunneling. |
protocol tcp aes | Uses TCP protocol with AES encryption for accept mode |
| tunneling. |
protocol telnet | Uses Telnet protocol (with IAC) for accept mode tunne- |
| ling. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show status | Displays tunnel accept status. |
start character <control> | Sets the accept mode start character. |
| The character may be input as text, control, decimal, or |
| hex. |
| A control character has the form <control>C. |
PremierWave XN Command Reference | 48 |