
| 5: Commands and Levels |
|
|
exit | Exits to the next higher level. |
no password | Removes the password so connections will be accepted |
| unchallenged. |
password <text> | Sets the password required on the network side of the |
| tunnel to begin |
| a connection. |
prompt disable | Inhibits any prompting for password on the network side of |
| the tunnel. |
prompt enable | Sets up so a user on the network side of the tunnel will be |
| prompted for |
| a password. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
password |
|
clrscrn | Clears the screen. |
exit | Exits to the next higher level. |
no password | Removes the password so connections will be accepted |
| unchallenged. |
password <text> | Sets the password required on the network side of the |
| tunnel to begin |
| a connection. |
prompt disable | Inhibits any prompting for password on the network side of |
| the tunnel. |
prompt enable | Sets up so a user on the network side of the tunnel will be |
| prompted for |
| a password. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
query port |
|
clear counters | Zeros Query Port counters |
clrscrn | Clears the screen. |
exit | Returns to the config level. |
no clear counters | Unzeros Query Port counters |
show | Displays statistics and information about the query port. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
state disable | Disables response to 77FE requests. |
state enable | Permits response to 77FE requests. |
write | Stores the current configuration in permanent memory. |
root level commands |
|
clrscrn | Clears the screen. |
enable | Enters the enable level. |
exit | Exit from the system |
ping <host> | Ping destination continuously with 5 second timeout |
ping <host> <count> | Ping destination n times with 5 second timeout |
ping <host> <count> <timeout> | Ping destination n times with x timeout (in seconds) |
show | Show system information |
show history | Displays the last 20 commands entered during the current |
PremierWave XN Command Reference | 155 |