
| 5: Commands and Levels |
|
|
show hardware information | Displays information about the hardware. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show memory | Displays current memory usage information. |
show task state | Displays current task states. |
show tlog | Displays the internal trouble log. |
write | Stores the current configuration in permanent memory. |
diagnostics |
|
clrscrn | Clears the screen. |
exit | Returns to the config level. |
log | Enters the next lower level. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
disconnect |
|
clrscrn | Clears the screen. |
exit | Returns to the tunnel level. |
flush serial disable | Does not flush serial data upon closing a tunneling con- |
| nection. |
flush serial enable | Flushes serial data buffer when a tunneling connection is |
| closed. |
flush stop character disable | Forwards the stop character from the Line to the network. |
flush stop character enable | Prevents the stop character from the Line from being for- |
| warded to the network. |
modem control disable | Does not watch the modem control pin to disconnect. |
modem control enable | Watches the modem control pin and disconnects if it is not |
| asserted. |
no stop character | Removes the stop character. |
no timeout | Disables disconnect after timeout feature for tunneling |
| sessions. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
stop character <control> | Sets the stop character. |
| The character may be input as text, control, decimal, or |
| hex. |
| A control character has the form <control>C. |
| A decimal value character has the form \99. |
| A hex value character has the form 0xFF. |
timeout <milliseconds> | Disconnects when no data has been received on the line |
| (serial port) for the |
| specified length of time. |
| <milliseconds> = timeout in milliseconds. |
write | Stores the current configuration in permanent memory. |
disconnect |
|
clrscrn | Clears the screen. |
exit | Returns to the tunnel level. |
flush serial disable | Does not flush serial data upon closing a tunneling con- |
| nection. |
flush serial enable | Flushes serial data buffer when a tunneling connection is |
| closed. |
PremierWave XN Command Reference | 58 |