Lantronix 900-607 manual XML Status Record Groups and Items, XSR Group and Items

4: Configuration Using XML

XML Status Record Groups and Items

Table 4-8lists the supported XML Status Record (XSR) groups and items. These groups and items show the status of the device in XML form and can only be exported. The XSR schema differs slightly from the XCR groups and items in that the XSR allows groups within groups.

Note: The Valid Values column of Table 4-8indicates the default value.

Table 4-8 XSR Group and Items

Group Name	Item Name	Value Name	Valid Values
arp	arp entry	ip address	ip address in format
			nnn.nnn.nnn.nnn
		mac address	mac address in format
			xx:xx:xx:xx:xx:xx
		type	dynamic or static
		interface	eth0 or wlan0
bridge (Attribute of	enable state		Enabled or Disabled
"instance" is "br0")
	active state		Active or Inactive
device	product info	product type	Lantronix
		serial number	12 hex digits
		firmware version	string in version format like
			7.2.0.0R15
		uptime	elapsed time in format d
			days hh:mm:ss
		permanent config	saved or unsaved
		region	possible values: U.S.,
			European Union, Japan and
			Worldwide
email (Attribute of	success	sent	decimal number
"instance" is "<decimal>")
		sent with retries	decimal number
	failed		decimal number
	queued		decimal number
email log (Attribute of	entry	time	timestamp in format d days
"instance" is "<decimal>")			hh:mm:ss
		log	string
hardware	cpu	type	string
		speed	form of <decimal>
			megahertz
	memory	Flash size	decimal number of bytes
		ram size	decimal number of bytes

PremierWave XN Command Reference 33