Audio Configuration section

ATA Voice Field Reference

Line page

Voice tab > Line page >

A codec resource is considered as allocated if it has been included in the SDP codec list of an active call, even though it eventually may not be the one chosen for the connection. So, if the G.729a codec is enabled and included in the codec list, that resource is tied up until the end of the call whether or not the call actually uses G.729a. If the G.729a resource is already allocated and since only one G.729a resource is allowed per device, no other low-bit-rate codec may be allocated for subsequent calls; the only choices are G711a and G711u. On the other hand, two G.723.1/G.726 resources are available per device.

Therefore it is important to disable the use of G.729a in order to guarantee the support of two simultaneous G.723/G.726 codec.

Voice tab > Line page >

Gateway Accounts section (SPA3102)

Gateway1/2/3/4	The first of 4 gateways that can be specified to be used in
	the <Dial Plan> to facilitate call routing specification (that
	overrides the given proxy information). This gateway is
	represented by gw1 in the <Dial Plan>. For example, the
	rule 1408xxxxxxx<:@gw1> can be added to the dial plan
	such that when the user dials 1408+7digits, the call will be
	routed to Gateway 1. Without the <:@gw1> syntax, all calls
	are routed to the given proxy by default (except IP dialing).
	The default is blank.

GW1/2/3/4 NAT	If enabled, the ATA device uses NAT mapping when
Mapping Enable	contacting Gateway 1.
	The default is no.

GW1/2/3/4 Auth ID	This value is the authentication user-id to be used by the
	SPA to authenticate itself to Gateway 1.
	The default is blank.

GW1/2/3/4	This value is the password to be used by the SPA to
Password	authenticate itself to Gateway 1.
	The default is blank.

ATA Administration Guide

178

PAP2T, SPA8000, SPA3102, WRP400, SPA2102 specifications

The Cisco Systems SPA2102 is a versatile Voice over Internet Protocol (VoIP) adapter that serves as a bridge between traditional telephony systems and modern IP networks. Designed primarily for small to medium businesses, the SPA2102 is highly regarded for its reliability, ease of use, and rich feature set. This device allows users to make and receive phone calls over the internet while maintaining the ability to connect traditional analog phones.

One of the standout features of the SPA2102 is its dual-port capability. The device includes two FXS ports, allowing users to connect two separate analog telephones. This makes it an ideal choice for businesses that want to retain their existing telephony infrastructure while transitioning to a VoIP system. The ability to utilize two telephone lines simultaneously provides flexibility and convenience, especially for users in a busy office environment.

The SPA2102 leverages Session Initiation Protocol (SIP) technology, which is widely recognized for its robustness and interoperability. The support for SIP ensures that the SPA2102 can work seamlessly with various VoIP service providers, offering users a broad range of options for their telecommunication needs. In addition to SIP, the device supports various codecs, including G.711, G.726, and G.729, allowing for flexible audio quality settings and bandwidth management.

Security is also a critical aspect of the SPA2102. It incorporates advanced encryption methods, such as Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS), to protect voice communications from potential eavesdropping. This focus on security makes the SPA2102 a reliable choice for businesses concerned about the confidentiality of their conversations.

The device is easy to configure and manage, thanks to its web-based interface. This allows administrators to quickly set up the adapter, manage network settings, and troubleshoot any issues that may arise. Furthermore, the SPA2102 supports Quality of Service (QoS) features, ensuring that voice traffic is prioritized over other types of network traffic, which enhances call quality and reliability.

Overall, the Cisco SPA2102 is a powerful, user-friendly VoIP adapter that combines traditional telephony with modern IP technology. Its dual-port capability, support for SIP, extensive security features, and ease of configuration make it a solid choice for businesses looking to innovate their communication systems while minimizing disruption. Whether used in a small office or a larger organizational setting, the SPA2102 continues to be a reliable component of VoIP solutions.

Cisco Systems SPA2102, WRP400, PAP2T Audio Configuration section, Gateway Accounts section SPA3102

Models: PAP2T SPA8000 SPA3102 WRP400 SPA2102

ATA Voice Field Reference