ATA Voice Field Reference
Line page
ATA Administration Guide 175
B
Voice tab > Line page >
Supplementary Service Subs cription section
The ATA device provides native support of a large set of enhanced or
supplementary services. All of these ser vices are optional. The parameters listed
in the following table are used to enable or disable a specific supplementary
service. A supplementary service should be disabled if a) the user has not
subscribed for it, or b) the Service Provider intends to support similar service
using other means than relying on the ATA device.
Use Auth ID To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the
user ID and password.
The default is no.
Auth ID Authentication ID for SIP authentication.
Directory Number Enter the number for this line.
Call Capacity Maximum number of calls allowed on this line interface.
Choices: {unlimited,1,2,3,…25 }. Default is 16. Note that the
the ATA device does not distinguish between incoming and
outgoing calls when talking about call capacity.
NOTE: unlimited = 16
Cfwd No Ans Delay Delay, in seconds, before the call forwarding of no-answer
calls feature is triggered.
The default is 20.
Mini Certificate Base64 encoded of Mini-Certificate concatenated with the
1024-bit public key of the CA signing the MC of all
subscribers in the group.
The default is empty.
SRTP Private Key Base64 encoded of the 512-bit private key per subscriber
for establishment of a secure call.
The default is empty.
Call Waiting Serv Enable Call Waiting Service.
The default is yes.