Cisco Systems SPA2102, SPA3102, WRP400, SPA8000, PAP2T manual Digit Sequence Examples

Configuring Voice Services	4
Configuring Dial Plans

Digit Sequence	Function
,	Enter a comma between digits to play an “outside
(comma)	line” dial tone after a user-entered sequence.
	EXAMPLE: 9, 1xxxxxxxxxx
	An “outside line” dial tone is sounded after the
	user presses 9, and the tone continues until the
	user presses 1.
!	Enter an exclamation point to prohibit a dial
(exclamation point)	sequence pattern.
	EXAMPLE: 1900xxxxxxx!
	The system rejects any 11-digit sequence that
	begins with 1900.
*xx	Enter an asterisk to allow the user to enter a 2-
	digit star code.
S0 or L0	Enter S0 to reduce the short inter-digit timer to 0
	seconds, or enter L0 to reduce the long inter-digit
	timer to 0 seconds.

Digit Sequence Examples

The following examples show digit sequences that you can enter in a dial plan.

In a complete dial plan entry, sequences are separated by a pipe character (), and the entire set of sequences is enclosed within parentheses.

EXAMPLE: ( [1-8]xx 9, xxxxxxx 9, <:1>[2-9]xxxxxxxxx 8, <:1212>xxxxxxx 9, 1 [2-9] xxxxxxxxx 9, 1 900 xxxxxxx ! 9, 011xxxxxx. 0 [49]11 )

•Extensions on your system

EXAMPLE: ( [1-8]xx 9, xxxxxxx 9, <:1>[2-9]xxxxxxxxx 8, <:1212>xxxxxxx 9, 1 [2-9] xxxxxxxxx 9, 1 900 xxxxxxx ! 9, 011xxxxxx. 0 [49]11 )

[1-8]xxAllows a user dial any three-digit number that starts with the digits 1 through 8. If your system uses four-digit extensions, you would instead enter the following string: [1-8]xxx

ATA Administration Guide 63