end with a red connector, and so on. See “Rear view” on page 9 for an illustration of the I/O connectors on the rear of the server.

Turning on the server

When the server is connected to an ac power source but is not turned on, the operating system does not run, and all core logic except for the service processor (the integrated management module) is shut down; however, the server can respond to requests to the service processor, such as a remote request to turn on the server. The power-on LED flashes to indicate that the server is connected to an ac power source but is not turned on.

Approximately five seconds after the server is connected to ac power, one or more fans might start running to provide cooling while the server is connected to power and the power-on button LED flashes quickly. Approximately one to three minutes after the server is connected to ac power, the power-control button becomes active (the power-on LED flashes slowly), and one or more fans might start running to provide cooling while the server is connected to power. Then, you can turn on the server by pressing the power button on the front control panel. See “Front control panel” on page 10.

Updating the server configuration

When you turn on the server for the first time after you add or remove a device, you might receive a message saying that the configuration has been changed. The Setup Utility program starts automatically so that you can save the new configuration settings. For more information, see Chapter 6 “Configuring the server” on page 67.

Some optional devices have device drivers that you must install. For information about installing device drivers, see the documentation that comes with each device.

The server comes with at least one microprocessor. If more than one microprocessor is installed, the server can operate as a symmetric multiprocessing (SMP) server. You might have to upgrade the operating system to support SMP. For more information, see the operating-system documentation.

If the server has an optional RAID controller and you have installed or removed a hard disk drive, see the documentation that comes with the RAID controller for information about reconfiguring the disk arrays.

Turning off the server

When you turn off the server and leave it connected to ac power, the server can respond to requests to the service processor, such as a remote request to turn on the server. While the server remains connected to ac power, one or more fans might continue to run. To remove all power from the server, you must disconnect it from the power source.

Some operating systems require an orderly shutdown before you turn off the server. See your operating-system documentation for information about shutting down the operating system.

Statement 5

CAUTION:

The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Chapter 5. Installing, removing, or replacing hardware 65

Page 74 Page 76
Page 75
Image 75
Lenovo 1043, 4011, 1044, 4010 manual Turning on the server, Updating the server configuration, Turning off the server
Page 74 Page 76

4011, 1043, 1044, 4010 specifications

Lenovo has made a significant mark in the world of personal computing, and their series of models like the 4010, 1044, 1043, and 4011 continue to exemplify innovation and performance. Each model caters to specific user needs, making them ideal for diverse computing scenarios.

The Lenovo 4010 stands out with its robust build quality and sleek design. Equipped with a powerful processor, this model is ideal for multitasking and heavy workloads. It features a full HD display, ensuring vibrant visuals for an immersive media experience. The inclusion of advanced cooling technologies allows for efficient thermal management, enhancing overall performance without overheating. Its generous battery life ensures that users can work for extended periods without needing to recharge.

The Lenovo 1044 is designed for those who prioritize portability without compromising on functionality. This lightweight laptop offers a solid combination of performance and battery efficiency. With its ergonomic keyboard and responsive touchpad, it provides a comfortable user experience. The model also incorporates Lenovo's proprietary software enhancements, which optimize performance and battery life, making it suitable for both work and entertainment.

The Lenovo 1043 continues this trend by offering a balance of performance and affordability. It features a clear and bright display alongside powerful internal components that handle everyday tasks with ease. Users appreciate its user-friendly interface and robust build, which promises durability over time. Additionally, the 1043 integrates smart technologies for connectivity, ensuring seamless online experiences and quick file transfers.

Lastly, the Lenovo 4011 builds on the strengths of its predecessors while introducing new features aimed at enhancing user experience further. With faster processing speeds and upgraded graphics capabilities, it caters well to gamers and content creators alike. Its expansive storage options, alongside cloud integration, allow users to store and access their data effortlessly. This model's attention to detail is evident in its design, making it not only functional but also visually appealing.

In summary, the Lenovo 4010, 1044, 1043, and 4011 models showcase the brand's commitment to providing versatile solutions for various computing needs. Whether users are seeking power, portability, affordability, or performance, Lenovo has tailored these models to meet those requirements, ensuring satisfaction and efficiency for everyday tasks and more demanding applications.
Top Page Image Contents