Fujitsu IRMC S2/S3 manual Parallel AVR sessions, 307

Console Redirection - Redirecting the console

Enable Local Monitor Off

This option allows you to activate the following options:

–In full-control mode of an AVR session, you can switch the local monitor on and off (AVR Extras menu, see page 102).

–For users with administrator or OEM permissions, the toggle button Turn Off / Turn On is also enabled. This also allows the local monitor to be switched on and off (see figure 188).

Figure 188: Advanced Video Redirection page - Local Monitor On / Off

–You can also configure that the local monitor is switched off automatically for the duration of an AVR session when an AVR session is started (see the Automatic Local Monitor Off when AVR is started option).

IIf no concurrent session with Local Monitor Off is active, the local monitor is automatically switched on again when the AVR session is closed.

Automatic Local Monitor Off when AVR is started

IThis option only takes effect if Enable Local Monitor has been activated.

If you activate this option, the local monitor is automatically switched off for the duration of the session when an AVR session is started. After the AVR session is closed, the local monitor is automatically switched on again if no concurrent session with Local Monitor Off is active.

IParallel AVR sessions:

Even if you switch on the local monitor during your AVR session (in the AVR menu Extras or with the Turn On button), the local monitor is automatically switched off again if a new, concurrent AVR session is started.

The local monitor is switched on again automatically when all AVR sessions have been closed.

ÊClick Apply to activate your settings.

iRMC S2/S3 307