Configuring the LAN interface of the iRMC S2/S3

ÊConfigure the following settings:

Management LAN

Set the value to Enabled.

Management LAN Port

The Management setting is recommended.

IFor details on configuring the remaining settings see section "Network Settings - Configure the LAN parameters" on page 238 and/or refer to the manual "BIOS (Aptio) Setup Utility" manual corresponding to your server.

ÊSave the settings.

ÊIf you want to use console redirection on the iRMC S3, continue with section "Configuring text console redirection for the iRMC S3" on page 53.

If you do not want to use text console redirection on the iRMC S3, exit the UEFI setup and continue with the next section "Testing the LAN interface".

3.1.4Testing the LAN interface

You can test the LAN interface as follows:

ÊUse a web browser to attempt to log into the iRMC S2/S3 web interface. If no login prompt appears, it is probable that the LAN interface is not working.

ÊTest the connection to the iRMC S2/S3 with a ping command.

iRMC S2/S3

47

Page 47
Image 47
Fujitsu IRMC S2/S3 manual Testing the LAN interface, You can test the LAN interface as follows