98 iRMC S2/S3
Using AVR
5.2.5.3 Managed Linux server:
Adjusting the settings for synchronization of the mouse pointers
Prerequisite: The managed server is running under one of the following Linux
operating systems:
– Red Hat 4.x
– Red Hat 5.x
– Suse 9.x
– Suse 10.x
– Suse 11.x
Different graphical user interfaces (GUIs) are available for Suse Linux and
Redhat Linux. The most important GUIs are:
– Gnome
–KDE
You can adjust the mouse pointer synchronization settings on the managed
server either using commands or under menu guidance.
You must adjust the following settings:
–Mouse motion acceleration = 1
–Mouse motion threshold =1
You can make all the settings for the managed server either directly at the
managed server or from the remote workstation over AVR.
Adjusting temporary settings on the managed server using commands
Use the xset command to make the settings for Pointer acceleration and Pointer
threshold (recommended values: 1 in each case) for the duration of the current
session.
Command syntax:
xset m(ouse)][acceleration][threshold]
Proceed as follows:
ÊCall a command line tool.
ÊRun the command xset with the following arguments:
xset m 1 1