Configuring and using the serial interface of the iRMC S2/S3

3.3.2Configuring the serial interface using of the iRMC S3

ÊCall the UEFI setup utility of the managed server. Do this by pressing [F2] while the server is booting.

ÊCall the Server Mgmt menu:

Figure 17: Server Mgmt menu

ÊConfigure the following settings:

Serial Multiplexer

Set the value to iRMCS3.

ÊCall the Serial Port 1 Configuration menu to configure the serial port:

Advanced – Super IO Configuration – Serial Port 1 Configuration:

60

iRMC S2/S3

Page 60
Image 60
Fujitsu IRMC S2/S3 manual Configuring the serial interface using of the iRMC S3, Server Mgmt menu